Domestic trade department:0579-87718188 87718288 87718618 87718658
Fax:0579 87718167
Contact person:Miss Chen
Foreign trade department:
0086 579 87718092 87718667 87718260
Contact person:Peggy
Fax£º0086 579 87718595 |
|
|
|
 |
1.Check the size of the door hole and confirm if it is proper,besides,please be careful that if the door has distortion or destoried during transportation,if yes, please rectify before installation.
2.Use gradienter during installation to keep the width same, allow dispersion 2.5mm width and 3mm diagonal.
3.Dig into through the hole( 12) in frame, fix the door with 3 expanded bolt if the door is very high,use 4 pieces.
4.After fastness, recheck the door frame and if the door and the lock can open smoothly,besides,check if the surrounding of the door panel and door frame are solid.
5.If ok,fill the cement into the frame hole to keep frame flat, the cement can not 1.5cm higher than the frame,when filling do not bear the frame distortion.
6.After installation,make sure that the clearance betweendoor panel and door frame is equality, opening the door should be very freely without yawp.
7.The oepnging of the lock should be agility
8.After installation,there can not be any disfigurementon on the door body.
|
|
